Header image  
AGRICULTURAL PRODUCER KANCHO RADKOV
line decor
  
line decor
 
 
 
 


 

Tehnology of grafted grape vine production

Qualities which must be met

The purchase of grafted grape vine material should be paying attention to the following:

1. Strands must be labeled with name of variety and basic material.

2. Vines to be first class, i.e. to have at least three well-developed rhizomes emerging from three different sides of the substrate with a length of at least part of their health, 7 cm length of the substrate by foot to the base of one-year shoots to 32 cm plus 2.

3. Coalescence between the graft and the substrate to be very good, with no cracks. Solder is tested by deflection of the vine at the site of grafting.

4. Mature part of the year-long rod to be at least 15 cm, where the rods are more than one - at least 12 cm.

 

Very carefully to ascertain whether the grafted vine material is not affected by the disease colored guy. She appears during storage transplanted vines. In the wood of diseased vines colored guy t appear dark brown to black spots with oblong or oval in shape and size from a few millimeters to 2-3 cm External vines look healthy. To detect colored guy, you need a knife to remove dead skin. Then in screening detected the characteristic black spots scattered at various locations in the substrate. Planted patients vine offset colored guy, but then the spots, especially those in the solder, are growing, covering the substrate on all sides, and vines sokodvizhenieto break in the second to fourth year perished.

Since it is not possible to separate sick from healthy vines, lots, where there is ill vine should be discarded.

It is best to keep the vines in damp sand, by placing pancake and covered with sand to solder. When the material will be planted recently, may be temporarily store open in damp soil, but ottsedlivo place.

During the winter is suitable to store the vines at storage cellars, basements and more. To this end, the floor space of the selected layer is covering with sand 10-15 sm thick. On it is placed vertically one line bundles vine roots and as a substrate to be covered with a solder layer of sand with 10% humidity. Ranks second line is the vine and buries in the same way. Any gaps are filled with good sand. The location of the solder should not be covered with sand.

Grafted rooted grape vines are transported in hot days when the temperature is above 0 ° C. The transfer of the vine should not be allowed drying the roots. For this purpose, the vines are wet wrap with sacking or straw..

>>More...

 

 

 
 

 

 

 

 

 

 

 


     

Web design I & I ©2009